八八字典>英语词典>angle of inclination翻译和用法

angle of inclination

英 [ˈæŋɡl ɒv ˌɪnklɪˈneɪʃn]

美 [ˈæŋɡl əv ˌɪnklɪˈneɪʃn]

倾斜角;磁倾角

医学化学

英英释义

noun

  • (geometry) the angle formed by the x-axis and a given line (measured counterclockwise from the positive half of the x-axis)
      Synonym:inclination

    双语例句

    • An instrument used by surveyors in order to measure an angle of inclination or elevation.
      用来测量倾斜角的测量员使用的装置。
    • Experimental results show that by using an optimal angle of inclination energy losses can be reduced and outlet flow fields improved.
      实验结果表明:采用最佳倾斜角叶片能降低叶栅能量损失和改善叶栅出口流场的气动性能。
    • When the speed is big, it is good to have a certain angle of elevation, on the contrary, it need not have the angle of elevation; it is suitable for the radial angle of inclination of the scavenging port to be 20 ° or so.
      当转速较大时适合有一定的仰角,反之,则不必有仰角;扫气口的径向倾斜角设计在20°左右比较合适。
    • It can be see from the measured data that the deviation angle of inclination is about 1 40 °, slightly exceeding the permitted value.
      现场检测数据显示,该抗风柱基础施工偏差略大于允许值,连接抗风柱的垫板约有140°倾斜。
    • In this paper, the license plate number of a wide range of tilt angle calculation means to conduct a large number of experiments, the final choice point by calculating the characters to determine the angle of inclination of the plate.
      本文研究了多种计算车牌号倾斜角的方法,进行了大量的实验,最终选择通过计算字符中心点来确定车牌的倾斜角。
    • The angle of inclination from the vertical of a vein, fault, or lode. Construction Technology of Long Curved Hoisting Transportation System in Steep Inclined Shafts
      倾斜余角因矿脉,断层或矿井倾斜而与垂直面形成的角度大倾角斜井长曲线提升机运输施工技术
    • The results of the analysis could play a important role in prediction of herringbone buckling and its angle of inclination on strip rolling line.
      研究结果可为板带材轧制过程中倾斜浪及其倾斜角度的预测和控制提供理论依据。
    • The main function of the inclinometer is to measure the angle of inclination 、 azimuth and tool face angle.
      随钻测斜仪的主要作用是完成井斜角、方位角、工具面角等参数的测量。
    • This article will present the rational optimization of the hoisted point on a whole stand bar tower of single point hoisting, the length of the pole, and the angle of inclination to find its optimum association.
      采用单纯形法优选抱杆参数,对单点吊整立杆塔的吊点位置、抱杆的长度、倾角和固定钢绳绳角进行合理的优化,从而找到了最优组合。
    • The research of regulative method on angle of inclination of straightener
      矫直辊倾角调整方法的研究